This press-fit bearing ensures stable performance under high load.
这款压入式轴承在高负载下仍保持稳定性能。
The interference fit bearing provides excellent rotational accuracy.
过盈配合轴承提供出色的旋转精度。
Install the pressed-in bearing using a proper hydraulic press.
使用液压机正确安装压入式轴承。
Force-fitted bearings are widely used in automotive transmissions.
压装轴承广泛应用于汽车变速系统中。
Ensure correct alignment when pressing in the bearing.
压入轴承时确保对准位置。
This bearing requires an interference fit to prevent slippage.
该轴承需过盈配合以防止打滑。
A smooth shaft surface improves press-fit bearing installation.
光滑的轴面有助于压入式轴承安装。
The sealed press-fit bearing resists dust and moisture.
密封型压入式轴承防尘防水。
High-precision pressing ensures long service life of the bearing.
高精度压装确保轴承长久使用寿命。
This component uses a stainless steel press-fit bearing.
该部件采用不锈钢压入式轴承。
Premium Press-Fit Bearings – engineered for precision, built for performance! Our high-quality press-fit bearings (model: PF-B7205) are crafted from aerospace-grade chrome steel, offering superior hardness, wear resistance, and extended service life. With a sleek black oxide finish, they not only look professional but also resist corrosion in demanding environments.
Available in 5 standard sizes (ID 25mm to 60mm), these interference fit bearings support radial loads up to 15kN and operate smoothly from -30°C to 120°C. Each unit is double-sealed with NBR rubber to block dust, water, and contaminants—perfect for automotive, industrial machinery, and robotics applications.
The pressed-in design ensures zero play and maximum stability, making installation fast and reliable when used with a bearing installer tool. Weighing just 180g per unit and priced competitively under $12, they deliver exceptional value without compromising quality.
Trusted by engineers and technicians nationwide, our force-fitted bearings have earned a solid reputation for consistency and durability. Whether you're upgrading equipment or repairing motors, this is the smart choice. Experience seamless motion control today—choose reliability, choose precision!
高端压入式轴承——精密设计，性能出众！我们高品质压入式轴承（型号：PF-B7205）采用航空级铬钢制造，具备超高硬度、耐磨性强和超长使用寿命。黑色氧化表面处理不仅外观专业，更能有效抵抗恶劣环境下的腐蚀问题。
提供5种标准尺寸（内径25mm至60mm），此类过盈配合轴承可承受高达15kN的径向载荷，工作温度范围从-30°C到120°C，适应多种工况。每颗轴承均采用双面NBR橡胶密封，防尘防水抗污染，特别适用于汽车、工业设备及机器人等高要求场景。
压装结构设计确保无间隙运行，搭配专用轴承安装工具，安装快速且稳固可靠。单颗重量仅180克，单价不足12元，性价比极高，是批量采购与替换升级的理想之选。
全国众多工程师和技术人员信赖之选，我们的压装轴承凭借稳定的品质表现赢得良好口碑。无论是设备改造还是电机维修，都能带来顺畅如初的运转体验。立即入手，感受真正精准可靠的传动力量吧！
